The Fluidicam offers low viscosity high shear rate viscosity measurement

Viscosity is an essential property to characterize fluid behavior under flow. FLUIDICAM is designed to measure flow curves of products with various consistency (liquids, gels or semi-solid emulsions…) by combining microfluidic and imaging technologies.​

• High precision viscosity measurement
• High shear rates
• Small sample volume
• Easy set up
• Low cost simple chips

Contact us at Fullbrook Systems & ask us to test 
some samples  01442 876 777 - sales@fullbrook.com

---

Discover the Turbiscan range of instruments for Stability and ageing testing of concentrated colloidal systems

How does the FluidIcam work

​The test  sample and a viscosity standard are pushed together through a microfluidic chip at controlled flow rates. Images of the flow are taken with dedicated camera and the position of the interface is measured.
When the sample viscosity changes, it will occupy a different volume in the chip and so the interface position will vary. A simple relation connects occupied volume and flow rates to the viscosity

​KEY BENEFITS

• Wide range of shear rates (100 to more than 100000 s-1)
• Wide range of viscosity (0.1 to 200,000 cP)
• Extreme accuracy even at low viscosities (better than 1% accuracy)
• Small sample volume (< 500 μL for a measurement point)
• Simple low cost chip design

Fullbrook Systems will test your samples for free.   What have you got to lose  
​Contact us on 01442 876 777 Email sales@fullbrook.com