​Brookfield process viscometer applications

Vertical Divider

PRINTING & COATINGS

Printing Flexographic gravure 
​Automatic viscosity control

Conformal coating of pcb's

Can coatings & metal decoration

Vertical Divider

OIL & GAS

Fracturing fluid viscosity

​Drilling mud viscosity

Cuttings re-injection

Bitumen

Vertical Divider

FOOD VISCOSITY

Batter viscosity
Spray drying control

​Brookfield process viscometers

Call Fullbrook.... 01442 876777

If you are printing  or coating. or in oil or chemicals or even the food industry there is a Brookfield viscometer for your application.    

Contact our application engineers and we can quickly help you specify the most suitable process viscometer.

Brookfield Process viscometer models include:- 

Process viscometer applcations

coating - batter - ink - resin -                                                
spray drying -
printing flexo gravure pad
dip coating
solvent based ATEX approved viscosity control

• AST100
• TT100
• PVS & BF35
• Viscosel VTA120 VTE250

<

>

AST100 viscosity sensor

The Brookfield  AST-100 is the only viscometer of its kind with accessible core. This rugged, no moving parts viscometer is designed to perform day after day under the extreme demands of all industries including printing, coating and adhesive applications with no maintenance. 

• ATEX Exd approved for solvent based products
• No moving parts
• Food grade construction option
• Easy to clean

Call us for more information 01442 876 777

The Brookfield TT100 range of viscometers offer process viscosity measurement at defined shear rate

• Exd ATEX approved for hazardous area
• Robust stainless steel design
• High pressure & Temperature options
• 4 - 20mA output signal
• Food grade sanitary design available
• Concentric cylinder measurement
• Defined rate of shear

Applications include - FRACTURING FLUID - RESIN  - BATTER - SHAMPOO & PERSONAL CARE......

The Brookfield BF35 is an oil industry standard for drilling fluid measurement.

• matches Fann viscometer geometry
• speeds 3, 6, 30, 60, 100, 200, 300, 600 rpm
• robust design
• easy to use

​Applications  DRILLING MUD

---

PVS high pressure rheometer from Brookfield

The PVS is a dynamic coaxial cylinder, controlled shear rate rheometer allowing quick and easy viscosity measurements under pressure at temperatures where sample boil-off is a problem

• Portable site-to-site mobility with 1' x 1' x 2' instrument footprint
• Designed to operate in severe environments with Hastelloy cups and bobs standard
• Quick and easy to operate
• Measures samples from vacuum to high pressure of up to 1000 psi
  • Safety relief valve included
• Measures under temperature conditions: -40°C to +260°C
  • RTD temperature sensor on the inner cylinder surface insures accurate sample temperature
  • Runs test to API industry standard
  • LSRV measurements to 0.2 sec-1

APPLICATIONS Simulation of In-Process conditions:

• Down Hole
• Cooking
• Blending
• Reactors

Viscosel VTA120 Viscosity measurement & control

The VTA120 is a completely pneumatic automatic viscosity control system.   More than 1000 VTA120 viscosity controllers been sold in the UK alone.    

Viscosity measurement is in Centipoise (cP) with a clear display of actual viscosity and control set point.    The VTA120 can be set up just to measure viscosity or linked to a dosing valve to control the process by adding solvent only when it is needed.

APPLICATIONS tend to be low and medium viscosity, typically:-
Liquid inks flexo and gravure, adhesives, solvent based chemicals
Oils Petroleum Products, Paints, Inks, Coatings Polymers, Ceramic Slurries &Paper Coatings

For more information or trial please
Contact Fullbrook on 01442 876 777 
or email sales@fullbrook.com  

Viscosel VTE250 viscosity controller

The VTE250 process viscometer offers viscosity indication and control in one complete package.   This Brookfield viscometer widely used in the printing and coatings industries for automatic addition of solvents. The clear digital display and wipe clean operator buttons makes the VTE250 a modern, economical option for in process viscosity control.

Wide viscosity range  - rotational viscosity measurement  - Centipoise (cP)  - 4 to 20mA output signal - built in set point control function

For more information or trial please
Contact Fullbrook on 01442 876 777 
or email sales@fullbrook.com